Rules

When programming a cutting program on a high-speed cutter, keep to the following steps:

1. Set the computer to program operation.
2. Enter a program number for each cutting job.
3. Enter the data records for the cuts in the order of cutting.
4. Confirm the data record input by pressing the Storage key.
5. Every time the material being cut is handled manually, the air table must be switched on.
6. When making edge trims and intermediate cuts the distance to the edge or to the next cut must not be less than 3 millimeters.
7. Parallel sizes are cut with the "automatic knife" command.
8. If there is more than one parallel cut with the same label size, push the repeat key and enter the number of cuts to be repeated.
9. The paper ejection command is input when, after a cut, the backgauge moves to a larger cut size.
10. The data input is concluded by actuating the End-of-program key.