Laser Cutter Digicut ECO
For cutting, grooving, perforating and engraving of single sheets using laser
POLAR Digicut ECO opens up a wide variety of creative possibilities for the processing of a single sheet.
Using laser you can not only cut sophisticated designs, but also punch, engrave and groove – all in one pass; and this on a variety of different materials. There are almost no limits in terms of design. Also no tooling costs arise by the use of a laser.
Some of the products which can be produced on the Digicut includes: greeting cards, invitations, envelopes, folders, letterheads, samples, business cards, table cards, lanterns, puzzles, bookmarks etc.
- Precise cutting of very delicate contours in a wide variety of materials
- Engraving without leaving marks on the flip side
- Economic production of print runs from 1 up to a few hundred copies
- No tooling costs as processing is done by laser
- POLAR safety standard enabling GS-certification
|Laser Source (sealed CO2 Laser, air-cooled)||30 W|
|Adjustable power control||0 - 100 %|
|Adjustable speed control||0,1 - 100 %|
|Speed max.||2.032 mm/sec | 80 in/sec|
|Work area [x × y]||860 × 610 mm | 33.86 × 24.02 in|
|PC with MS Windows* required|
|Graphic design software||vector-oriented drawing program
(e.g. CorelDraw or Adobe Illustrator)
|Printer interface||USB 2.0 and LAN|
|Dimensions (W × D × H)||1,365 × 880 × 1,010 mm |
53.74 × 34.65 × 39.76 in
|*must be made available by the customer|